When space is tight and performance can’t be compromised, the Magni TH 3.6 telehandler delivers. With a 3 000 kg capacity and up to 5.8 m lift height, this small yet mighty machine handles heavy loads in construction yards, warehouses and industrial facilities across Perth and Western Australia. Its low-profile design easily slips through narrow doorways and confined aisles. Four-wheel drive and hydrostatic transmission with three steering modes—front, concentric and crab—ensure stability and manoeuvrability on uneven or congested sites. Inside the cab, operators enjoy a new ergonomic layout, 7″ Magni Combi Touch System (MCTS) touchscreen, climate control, USB charging and a suspended seat. Whether you’re looking to purchase a new or used telehandler through MCT Equipment, the TH 3.6 is built to boost productivity, cut cycle times and navigate WA’s toughest conditions.
Quick Summary
-
3 000 kg capacity at 5.4 m; 2 500 kg to maximum lift (5.8 m); 1 100 kg at 3 m horizontal reach
-
Low-profile chassis fits under low clearances—ideal for tight indoor areas
-
Deutz Stage V 75 kW engine with 35 km/h top speed; hydrostatic transmission
-
Four-wheel steering (front/concentric/crab) for minimal repositioning
-
Ergonomic cab with 7″ touchscreen MCTS, air-suspended seat, heating, USB ports
-
Applications: construction, logistics, industrial and soon agricultural use across WA
-
Available through MCT Equipment as telehandler new sales or used telehandler options in Perth
Overview of the Magni TH 3.6 Telehandler
The Magni TH 3.6 telehandler sits at the top of MCT Equipment’s range of compact lifters. As the smallest fixed-telescopic handler in Magni’s TH lineup, it was designed for tight-space environments without sacrificing power. Featuring a maximum lifting capacity of 3 000 kg, the TH 3.6 copes with palletised loads on construction sites, stockpiles in logistics yards and materials in industrial facilities. Its low chassis profile (just under 2 m height when retracted) and narrow width (1 81 cm) allow it to slip through shipping container doors, workshop entryways or indoor halls where larger telehandlers cannot. Visit MCT Equipment’s product page to learn more about the TH 3.6 telehandler Perth stock.
Performance & Capacity
2.1 Lifting Capacity & Reach
-
Maximum lifting capacity: 3 000 kg (at ground level)
-
Maximum lift height: 5.80 m
-
Maximum reach: 3.20 m
-
Capacity at maximum height (5.8 m): 2 500 kg
-
Capacity at maximum reach (3 m): 1 100 kg
These figures position the TH 3.6 telehandler as an efficient choice when you need to stack bricks, position roofing trusses or load pallets onto mezzanine racks. A load-chart accessible through the MCTS touchscreen ensures safe operation, letting operators confirm load capacities at varying heights and reaches before lifting. TH-3.6
2.2 Engine & Speed
-
Engine model: Deutz TCD 2.9 L4 Stage V diesel
-
Rated power: 55.4 kW (75.3 hp) @ 2 200 rpm
-
Maximum torque: 260 Nm @ 1 600 rpm
-
Displacement: 2 900 cm³; 4-cylinder, direct injection, turbocharged
-
Top travel speed: 35 km/h
The Stage V–compliant Deutz powerplant delivers fuel-efficient performance compliant with emissions regulations across Australia. A hydrostatic transmission paired with a 500 bar maximum pressure pump provides smooth, responsive power for both low-speed, high-torque lifts and faster site transits up to 35 km/h. The TH 3.6 draws minimal fuel even under heavy loads, helping reduce running costs. TH-3.6
Design & Manoeuvrability
3.1 Compact Dimensions
-
Overall width: 1 810 mm
-
Overall height (boom retracted & lowered): 1 990 mm
-
Length to fork face (flattened): 4 990 mm
-
Wheelbase: 2 720 mm
-
Ground clearance: 371 mm
With a sub-2 m height and under‐1 .82 m width, the TH 3.6 moves easily through gates, doorways and narrow aisles. Its 371 mm ground clearance tackles uneven terrain—ranging from loose gravel in quarries to compacted clay on regional WA farms—without bottoming out. Its relatively short wheelbase (2.72 m) and tight turning radius (3.30 m at the fork) mean you can manoeuvre the TH 3.6 around obstacles that would halt larger telehandlers.
3.2 Four-Wheel Steering Modes
-
Front steering: Standard mode for straight-line travel and gradual turns
-
Concentric steering: All four wheels turn to a common centre, reducing turning circle to just 3.30 m (end of forks)
-
Crab steering: All wheels steer in the same direction, allowing diagonal movement—perfect for aligning loads alongside racks, walls or narrow storage bays
Crab and concentric modes significantly reduce repositioning time in confined areas. Whether you need to load a truck in a narrow dock bay or align forks along a pallet rack in a warehouse, the TH 3.6’s steering sophistication boosts cycle‐time efficiency and site safety. TH-3.6
Operator Comfort & Technology
4.1 Ergonomic Cab Features
Magni introduced a new compact cab on the TH 3.6 that balances visibility, comfort and functionality:
-
Panoramic visibility: Large front, side and roof glazing for clear sightlines when positioning forks or attachments
-
Air-suspended seat: Adjustable for operator weight, reducing fatigue during long shifts
-
Adjustable steering column & joystick: Customise seating position for optimum control and comfort
-
Heating & radio: Maintain productivity in cold mornings or during downtime
-
USB 3.0 & C-type ports: Charge mobile phones, tablets or tablets used for site apps without leaving the seat
-
Cup holder & storage compartments: Keep tools or personal items within reach
Operators feel at ease even on extended shifts thanks to reduced vibrations and intuitive control placement. The cab’s ergonomic layout is a significant step up from older MCT telehandler models, paying dividends in operator satisfaction and retention. TH-3.6
4.2 Magni Combi Touch System (MCTS)
A 7″ touchscreen monitor at the centre of the dashboard offers:
-
Icon-based menus: Easy navigation to check load charts, machine diagnostics and performance metrics
-
Real-time data: View current engine RPM, hydraulic pressures and fuel levels to optimise operations
-
Load-management screen: Confirm safe lift capacities at various boom angles, extending operator confidence in every lift
-
Customisable parameters: Set maximum boom speed, adjust lift/lower speeds or configure service reminders
Because the MCTS is fully integrated with CAN-bus electronics, the on-screen information updates instantly. This reduces operator guesswork, cuts down on training time and minimises stoppages due to unexpected hydraulic or engine conditions. TH-3.6
Applications & Use Cases
5.1 Construction Sector
-
Brick and block handling: Lift up to 2 500 kg of pavers or block pallets to elevated work areas (5.8 m) without needing a larger crane.
-
Roof truss positioning: Navigate trusses through low-clearance sheds or second-floor scaffolding, thanks to low profile (under 2 m) and 3.3 m turning radius.
-
Site clean-up and debris removal: Use high-flow attachments (e.g. bucket or sweepers) to clear rubble from boggy or uneven pads—ground clearance ensures no bottoming out on rough terrain.
5.2 Logistics & Warehousing
-
Pallet racking operations: The TH 3.6’s crab steering mode lets you align forks perpendicular to pallets in narrow aisles without repositioning the rear end.
-
Truck loading & unloading: At up to 35 km/h road speed, reposition between dock doors quickly. Load 3 000 kg pallets onto trucks in congested yards using concentric steering to minimise carpark space.
-
Stock rotation: In cold-storage or high-bay warehouses, lift heavier loads to mid-height racks using the 2 500 kg capacity at 5 m for efficient inventory handling.
5.3 Future in Agriculture
-
Hay-bale handling in sheds: Load and stack bales of hay or straw in barns with low overhead clearances (sub-2 m doorways). The TH 3.6’s compact roof height navigates narrow openings.
-
Feeding & feed‐lot operations: Tackle feed distribution in confined bunkers with a 1 100 kg capacity at 3 m reach—ideal for placing feed directly into troughs or bins.
-
Nursery & horticulture tasks: Maneuver through plant-nursery aisles where space between benches and racks is limited; swap to specialised attachments (e.g. grab or clamp forks) to handle palletised potting mix.
Benefits of Choosing the TH 3.6 Telehandler
6.1 Efficiency in Tight Spaces
-
Low-profile footprint means fewer repositioning delays—boosting cycle times on indoor jobsites or narrow yard lanes.
-
Three steering modes reduce site congestion by eliminating multiple back-and-forth turns.
-
Rapid deployability (drive-on feature) lets operators drive the telehandler onto trailers or into shipping containers for quick transport between sites—essential for WA’s regional projects.
6.2 Versatility & Attachments
-
Compatible attachments: Quickly swap forks, buckets, winches or lift hooks using Magni’s quick-attach system—no need to exit the cab, minimising downtime.
-
High-flow hydraulics: With a maximum hydraulic flow of 90 L/min and 260 bar operating pressure, the TH 3.6 can run heavy-duty attachments, from augers to pallet forks to specialised lifting jibs.
-
Multi-purpose use: MCT telehandler customers often leverage the TH 3.6 for both sitework and ad-hoc maintenance tasks, replacing forklifts or small cranes in one package.
Read more about the best attachments for telehandlers
Maintenance, Service & Support
7.1 Serviceability
-
Easy-access engine bay: Side-opening panels expose the Deutz diesel engine for quick checks on oil, coolant and air filters—essential for remote wash-down at rural WA job sites.
-
Centralised greasing points: Regular lubrication takes minutes, reducing unscheduled downtime and extending component life.
-
On-board diagnostics: Use the MCTS touchscreen to check fault codes and system warnings before failure—helping prevent breakdowns in the field.
7.2 Warranty & Back-up
-
Standard Magni warranty: Typically 12 months or 1 000 hours (verify through MCT Equipment), covering major driveline and hydraulic components.
-
MCT Equipment’s service network: Benefit from factory-trained technicians across Perth and regional WA.
-
Genuine parts supply: Keep your TH 3.6 on the road with rapid delivery of genuine Magni replacement parts and filters.
-
Used telehandler inspection: MCT thoroughly inspects pre-owned units, offering transparent condition reports and certified maintenance histories—minimising risk when you choose a used telehandler.
How to Hire or Buy Your TH 3.6 Telehandler
8.1 Hiring from MCT Equipment
-
Enquire online or call our Perth branch: Provide project details, site conditions and estimated hire duration.
-
Select attachments: Choose from pallet forks, buckets or specialised implements—configured at our workshop for immediate dispatch.
-
Arrange delivery: We deliver and demonstrate operation on site, ensuring operators are familiar with MCTS controls and safety systems.
-
Ongoing support: Our 24/7 support line ensures any issues are addressed promptly, keeping your telehandler running.
8.2 Purchasing a New or Used Telehandler
-
New TH 3.6 Telehandler: Customise colours, attachments or optional extras (e.g. LED work-lights, glass-roof package) at time of order. Competitive financing and lease options are available through MCT’s finance partners.
-
Used Telehandler: Browse certified pre-owned TH 3.6 units with full inspection reports. Every used telehandler undergoes thorough servicing, so you buy with peace of mind.
-
Demo on Request: Arrange an on-site demonstration in Perth or regional WA—see how the TH 3.6 telehandler tackles your toughest lift scenarios before committing.
Visit MCT Equipment’s product page for telehandler pricing, availability and book a demo:
Additional Resources & Related Reading
Explore these posts to learn how different telehandler types compare, what attachments maximise ROI and why a telehandler is often the smarter choice over a forklift or small crane on WA jobsites.
MCT are Perth’s Heavy Lifting Experts
The Magni TH 3.6 telehandler brings together compact design, 3 000 kg capacity and advanced operator features to tackle Perth’s tightest sites and WA’s toughest terrains. With low-profile dimensions, four-wheel steering and intuitive MCTS touchscreen controls, it cuts cycle times and boosts site productivity. Whether you need a new telehandler with factory warranty or a certified used telehandler through MCT Equipment, the TH 3.6 delivers unmatched versatility in construction, logistics, industrial and soon agricultural applications.
Ready to see the difference? Contact MCT Equipment today to arrange a no-obligation demo or quote for your Magni TH 3.6 telehandler in Perth. Call 08 6325 5478 or email sales@mctequip.com.au to book your session—experience how this robust, compact powerhouse can transform your material-handling operations.